Hotchkis 22435R MX5 Rear Sport Sway Bar User Manual
Installation of hotchkis front sway bar
Thank you for your purchase from our new line of Mazda parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
1F
Raising
Vehicle
Removal of the front sway bar should be done at ride height, so it is recommended that the
vehicle be raised by a flat alignment style rack, or place the front of the vehicle on ramps and
securely block the rear wheels.
2F
Remove front Splash Guard
To access the front sway bar you will need to remove the front splashguard. There are a
series of screws and snap clips that hold it in place. Once all the clips and screws are removed
you can set the splashguard aside.
Installation of Hotchkis Front Sway Bar
Sport Sway Bar Kit 22435, 22437
Mazda MX-5, RX-8
Document Outline
- Installation of Hotchkis Front Sway Bar
- Sport Sway Bar Kit 22435, 22437
- Installation of Hotchkis Rear Sway Bar
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?