Hotchkis 1314 Trailing Arms, Lower, 65-70 GM B-Body User Manual
Hotchkis For the car
1314 LOWER TRAILING ARMS
65-70 CHEVROLET B-BODY
Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @
WARNING
: This installation involves removal and re-installation of the rear coil springs.
Springs should be removed and installed by a trained technician for your safety!!
INSTALLATION OF HOTCHKIS PERFORMANCE LOWER TRAILING ARMS
1)
Securely block the front wheels of the vehicle. Use a jack to raise the rear of the vehicle and
support with jack stands to the frame.
2)
Use a 1/2" socket or wrench to remove the screw retaining the brake lines to the trailing arms.
Discard the stock hardware, as you will not be reusing it.
Document Outline
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?