Hotchkis 2253 Sway Bars, Set, 65-66 GM B-Body, Sport - Manual (Page 2)

3) Turn the front wheels to point straight ahead. If you jacked up the front of the vehicle, you
should now lower the vehicle so that the weight is on the front tires. Slide the stock bar towards
the passenger side of the vehicle. The end of the sway bar should contact the rear edge of the
brake drum preventing you from fully removing the sway bar.
Turn the front wheels to the left until the end of the bar can slide past the rear edge of the brake drum.
On some disk brake applications it may be necessary to remove the caliper to allow the sway bar to
slide past.
4) Move the sway bar end towards the rear on the passenger side of the vehicle until the opposite
end of the bar clears the slot in the frame on the driver’s side.