Hotchkis 19104 300S, Charger Sport Coil Springs User Manual
Page 10
Advertising
9)
You should now be able to easily remove the rear shocks and stock springs. Keep track of the rubber
spring isolators located on the top and bottom of the spring. You will be using them for reinstallation.
10)
For each shock, unbolt the shaft nut using a 15mm socket. Remove the washer, top hat, and the boot
to reveal the stock bumpstop. Replace the bumpstop with the provided Hotchkis polyurethane
bumpstop in the same manner. Reassemble the shock. Fully tighten the shaft nut.
Note: Daytona R/T Vehicles uses STOCK rear bumpstops.
Advertising