Hotchkis 19104 300S, Charger Sport Coil Springs User Manual
Installation of hotchkis front coil springs
Sport Coil Springs 19104
05 Dodge Charger Hemi, Daytona R/T
Thank you for your purchase from our new line of Charger parts.
Please call us at (877) 4NO-ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
Visit us online @
Warning: This installation should be performed by a trained professional. The installation requires
lowering of the rear cradle from the vehicle for spring removal and reinstallation.
Tools Required for this Installation
- Hydraulic jack, jack stands, torque wrench (4 post lift or alignment rack preferable)
- Coil spring compressor (most major auto parts chains can rent these out)
- The following sockets or wrenches: 10mm, 13mm, 15mm, 16mm, 18mm, 21mm
INSTALLATION OF HOTCHKIS FRONT COIL SPRINGS
1)
Secure the rear wheels with blocks and jack the front up until the front wheels are off the ground.
Support the front of the vehicle with jack stands on the frame.
2)
Remove the front wheels using a 21mm socket.
Document Outline
- Sport Coil Springs 19104
- Sport Coil Springs 19104
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?