Hotchkis 19104 300S, Charger Sport Coil Springs - Manual (Page 6)

12)
Before compressing the spring, test fit the top hat onto the shock shaft and see if your marks line up. If
not, rotate the coil spring until they align.
13)
Once aligned, compress the coil spring and install the shaft nut back on. Fully tighten hardware.
14)
Reinstall the spring shock assembly in the same manner as removal. When installing the lower shock
bolt make sure the hole lines up with the shock clevis. Make sure the threads start correctly by
threading the bolt by hand. Once properly threaded fully tighten hardware.
15)
Perform steps 1-6 in reverse order to complete the installation.
You are now finished with the front coil spring installation! Make sure that all hardware is fully tightened before
driving the vehicle. Let’s move on to the rear spring installation.