Land of Nod OSLO CRIB User Manual
Page 10
The mattress height should be lowered as your baby grows to ensure that he/she does
not climb out of the CRIB. When child is able to pull to standing position, set mattress to
lowest position and remove bumper pads, large toys and other objects that could serve as
steps for climbing out. Regularly assess your baby’s abilities and make adjustments
accordingly.
To adjust the height of the mattress support, remove the mattress from the crib.
Unscrew all four MATTRESS SUPPORT BOLTS , remove all LOCKING WASHERS
and REGULAR WASHERS and remove MATTRESS SUPPORT PANEL . Remove
and reinsert the smooth ends of each MATTRESS SUPPORT PIN in mattress support
holes on SIDE RAILS at desired height. Refer to steps 9 through 11 for reinserting
MATTRESS SUPPORT PANEL and reattaching REGULAR WASHERS , LOCKING
WASHERS , and MATTRESS SUPPORT BOLTS .
Periodically check to make sure every component is properly and securely in place and all
bolts and fasteners are tight.
Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with
mild soap on a soft rag. Rinse and dry thoroughly. If you ever re-finish this furniture, be
sure to use only a non-toxic finish specified for children’s furniture.
Store crib in a dry area.
operation