Ohaus RS232 Interface Manual ru - Manual (Page 5)

RS232 Interface EN-3
Output examples: (Note: * and _ indicate spaces)
*****192.21_g - Manual, Continuous or On-Stable printing
*******0.01_g_? unstable reading
*******0.01_g___ 00:00:00
- Interval Printing (example:15sec interval)
*****176.30_g_?_00:00:15 unstable reading
*****192.08_g___00:00:30
*****192.21_g
*****207.80_g_TOTAL - Accumulate Mode (Manual printing only)
RS232 INPUT
The balance will respond to various commands sent via the interface adapter. Terminate the
following commands when with a [CR] or [CRLF].
Scout Pro and Traveler Commands
? print current mode
0A turn Auto-print off
SA Auto-print on, prints on stability
CA Continuous Auto-print
(n)A Auto-print on 1 to 3600 second intervals (n = 1 to 3600)
C
perform span calibration
L perform linearity calibration
0M gram mode
1M ounce mode
2M troy ounce mode
3M pennyweight mode
4M parts counting mode
5M pound mode
T tare balance, same as pressing ON-ZERO
V print software version
(Esc)R reset balance to factory defaults
P same
as pressing PRINT
LE print last error code, i.e. [Err 0]
0S print unstable data
1S print stable data only
Navigator Commands
P same
as pressing Print
SP print stable weight only
IP immediate print of displayed weight (stable or unstable)
CP Continuous print of weights
SLP Auto-print stable non-zero weight only
SLZP Auto-print stable non-zero weight and zero reading
xP
Auto-print on 1 to 3600 second intervals (x = 1 to 3600)
0P turns auto-print off
PM print current mode