Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 21)

EXPLORER BALANCES EN-19
3.7.11 Weighing Units
The balance can be configured to measure in a variety of weighing units, including three (3) custom
units. Touch Units to choose from the displayed list. (Scroll down to see all options.)
Note: The active weighing Unit can also be accessed by touching the unit area of the Main Display
line; If a unit is not displayed in the list, it must first be turned on via the User Menu.
3.7.12 Preset Tare
To enter a Preset Tare, press the Icon and then enter a value;
enter 0 to clear the Preset Tare. The display will show the PT symbol and the tare value as a negative
number.
3.7.13 Calibration Test
is used to compare a known calibration weight against the last stored span calibration data.
3.7.14 Calculator
To use the built-in calculator application, touch Calculator. A four function calculator with addition,
subtraction, multiplication and division mathematical operations is available.

Perform a numeric operation using the keypad.

Press = to view the result.

To Clear the display: Press CE to clear the entry, C to clear
all

Touch x to close and return to the current Application.
Note: Calculator is not available in software version 1.10.
3.7.15 Stopwatch
To use the built-in stopwatch application, touch Stopwatch. A countdown timer with interval (lap)
timer is available.

Press Start to begin using the Stopwatch timer.

Press Reset to reset the timer to Zero.

Touch Close to close and return to the current Application.
3.7.16 Logout
Used for User logout and return to User Login screen. This feature is only active if a user profile has
been created and a User has logged in.