Ohaus EXPLORER PRECISION HIGH CAPACITY BALANCES Manual - Manual (Page 40)

EN-38 EXPLORER BALANCES
4.4.4 Check Weighing – Nominal/Weight Tolerance Mode
With this feature you can establish a Target or Nominal weight
value and pre-set tolerance in weight.
To enable this feature, enter the Setup menu.
Change the mode to Nominal/wt. Tolerance.
The Check Weighing options screen returns.
Press Done to begin Check Weighing.
CHECK WEIGHING – Nominal/Wt Tolerance home
screen
Main Display Line
Second Display Line (not shown)
Reference Fields
Application Buttons
Functions Application Icon
To use this mode, touch Edit Settings to set the Nominal, and
Upper and Lower Tolerance values (in weight).
(See keyboards below.)
Press Return to Application when settings are complete.