Shogun Motorsports Kawasaki Ninja 250 (08-12) Frame Slider User Manual
Page 5
10.
Mount counter shaft sprocket cover.
11.
Mount linkage to shift shaft.
12.
Mount left and right side sliders using 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 (Holds puck
to offset) 99-HW-M10WASH Washer M10 Zinc Plated 99-LN-LN10125 (one washer goes under
the head of the bolt, one goes under the Hex Lock Nut) Hex Lock Nut 10 X 1.25
(Left side slider longer than right)Torque down to 40 ft lbs.
13.
Mount bodywork and reconnect your turn signals.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun frame sliders are really meant to help possibly save the frame from damage in the event of a
crash. Because Shogun frame slider products have been very successful in saving cases, bodywork,
levers and so on in the past, customers just assume sometimes you can put the product on and no
damage will happen. The fact is, some crashes result in little or no damage to the motorcycle and some
bikes are destroyed. It’s kind of like a bumper on a car, sometimes it works, sometimes it doesn’t.It
really depends on all the different forces applied during the incident. We’ve seen bikes crash at 100 mph
with little damage and some at 15 mph with major damage.