Shogun Motorsports Kawasaki ZX10R (08-10) Frame Slider User Manual
Shogun Motorsports For motorcycles
Kawasaki ZX10R (08-10)Frame Slider
Part Numbers: 750-4939, 755-4939, 750-4930,
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves.The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason.
measure location of cut and if in doubt at any point please call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
Black Left Side Puck
White Left Side Puck
Polished Billet Left Side Puck
Socket Cap 10 X 1.25 X 90 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
Black Right Side Puck
White Right Side Puck
Polished Billet Right Side Puck
Socket Cap 10 X 1.25 X 60 Main Engine Stud
Frame Sliders: Right shorter than Left
Remove right side bolt. Mount right side puck with (99-HB-SH10125060) Socket Cap 10 X 1.25 X
60 Main Engine Stud and torque down to OEM torque specifications.