Shogun Motorsports Suzuki GSXR1000 (05-11) Axle Slider - Manual (Page 3)

6.
Slide axle puck (99-AS-702-0100) over rod then tighten 8mm washer and 8mm locknut. NOTE:
Do not over tighten assembly; nylon locking nuts will hold assembly tight.
READ CAREFULLY
Shogun cannot guarantee that they will protect your motorcycle from any extent of damage.
Shogun axle sliders are really meant to help possibly save the bottom of your forks from damage in the
event of a crash. Because Shogun frame slider products have been very successful in saving cases,
bodywork, levers and so on in the past, customers just assume sometimes you can put the product on
and no damage will happen. The fact is, some crashes result in little or no damage to the motorcycle
and some bikes are destroyed. Actual damage varies depending on all the interface of multiple forces
applied during the incident. We have seen bikes crash at 100 mph with little damage and some at 15
mph with major damage.