Shogun Motorsports Honda CBR1000RR (06-07) NO CUT Frame Slider - Manual

Honda CBR1000RR (06-07) NO CUT Frame Slider
Installation Instructions
Part Numbers: 750-3819, 755-3819, 750-3810,
850-3810
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from
factory service manual , safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. Precisely
measure location of cut and if in doubt at any point please call us before the install process has begun.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-3809-L Black Left Side Puck
1 $20.00 99-FS-750-3800-L White Left Side Puck
1 $25.00 99-FS-850-3800-L Chrome Left Side Puck
1 $25.00 99-OF-750-3810-L&R Left Side Offset Black Anodized (Longer)
1 $2.00 99-SP-750-3810-L&R Body Spacer ½ OD ½ Long
1 $1.50 99-HB-BH0610030 Button Head Socket 6 X 1.0 X 30
1 $2.00 99-HB-SH10150045 Socket Cap 10 X 1.5 X 45 (Holds puck to offset)
1 $5.50 99-HB-SH12125080 Socket Cap 12 X 1.25 X 80 Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-3819-R Black Left Side Puck
1 $20.00 99-FS-750-3810-R White Left Side Puck
1 $25.00 99-FS-850-3810-R Chrome Left Side Puck
1 $25.00 99-OF-750-3810-L&R Right Side Offset Black Anodized
1 $2.00 99-SP-750-3810-L&R Body Spacer ½ OD ½ Long
1 $1.50 99-HB-BH0610030 Button Head Socket 6 X 1.0 X 30
1 $2.00 99-HB-SH10150045 Socket Cap 10 X 1.5 X 45 (Holds puck to offset)
1 $5.50 99-HB-SH12125090 Socket Cap 12 X 1.25 X 90 Main Engine Stud
Frame Sliders: Left frame slider is longer than right.
Offsets: Left and right offsets are the same.
Installation Steps:
1.
Remove left and right body panels.