Spicer Tandem Drive Axles Service Manual D170, D190, and D590 Series - Manual (Page 20)

16
Power Divider
Lube Manifold Disassembly
1. Disconnect the hose from the lube manifold.
2. Remove the manifold assembly by prying it out
around the inner diameter.
Once removed, the seal manifold assembly cannot be
reused. This component should always be replaced with
new. Use the same removal procedure for the output side
gear seal removal on the non-pump models.
Note: Seals are not sold separately from the manifold.
IMPORTANT
1
1 - Barbed Nipple