Velleman VMB1TCW - Manual (Page 19)

 Scroll through the menu using the ↑ and ↓ buttons.
Program
Settings
Operating mode
Button lock
Sleep timer
Low temp. alarm
High temp. alarm
Anti-freeze temp
Upper heat temp
Lower cool temp
Upper cool temp
Hysteresis
Temp difference
Unjam pump
Unjam valve
Local program
Zone number
1
Diff. Sensor
1
Sensor cal.
1
Change name
2
To main menu
Configuration
Language
Temp. read-out
Master clock
Global alarm
Battery backup
Change PIN code
Firmware version
Address
1
Link wake-up
1
Link go-to-bed
1
Scan sensors
1
To main menu
Display
Contrast
Backlight
To main menu
Statistics
1
Min temp 16.0°
Max temp 23.0°
- 0m/5m
0m/5m
8m/1h10m
10m/1h15m
18m/2h35m
To main menu
Exit
1. This menu is not available when a zone or ‘all
rooms’ is selected.
2. This menu is not available when ‘all rooms’ is
selected.
Note:
The naming of the menus and sub-menus might differ
depending on the controllers’ firmware version. Always
make sure to use the latest firmware version.
 Select the menu item with the → button.
 When applicable, scroll through the sub menus with
the ↑ or ↓ button and select with the → button.
 Change the data entry field (flashing item) using the
↑ or ↓ button.
 Confirm or move to the next entry field with the →
button.
 Cancel or return to the previous item by using the ←
button.
 Exit the menu with the  button.
When a data entry field (flashing item) is still active,
changes are discarded when using the
 button.