Velleman VMB1TCW - Manual (Page 25)

5. Select the battery backup menu with the
→ button.
6. Enable the battery backup watchdog when a battery
is inserted or disable it when no battery is present
using the
↑ or ↓ button.
7. Confirm the battery backup setting with the
→ button.
8. Exit the menu with the
 button.
Addressing
Every module on the Velbus system must have its own unique address. These address are set via the Velbuslink © .
Assign an action to the wake-up time
The wake-up time can be used with the thermostat program but also to perform a certain action e.g. switching off
staircase lighting, opening the roll-down window shutters, switching certain mains outlets on or off…
This can be set via Velbuslink
©
Assign an action to the go-to-bed time
The go-to-bed time can be used with the thermostat program but also to perform a certain action e.g. switching on
staircase lighting, closing the roll-down window shutters, switching certain mains outlets off…
This can be set via Velbuslink
©
Location

↑
↓ Menu
→
Mode
←
Batt. backup __
Location

↑
↓ Menu
→
Mode
←
Batt. backup On
Location

↑
↓ Menu
→
Mode
←
Battery backup
Location

↑
↓ Menu
→
Mode
←
Mo 0:05