Velleman VMB1TCW - Manual (Page 26)

Searching for temperature sensors
Before the controller can work together with the temperature sensors VMB1TS it must first scan the network for all
connected temperature sensors. When temperature sensors are installed or removed afterwards, the search process
must be repeated to update the list of sensors to the new situation.
1. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
2. If necessary scroll through the extended menu using
the ↑ or ↓ button until the ‘Configuration’ item
appears.
3. Select the configuration menu with the → button.
4. Scroll through the configuration menu using the
↑ or
↓ button until the ‘Scan sensors’ item appears.
5. Select the scan sensors menu with the → button.
The search for sensors on the network is now in
progress.
6. Once the search process is completed, the first of the
connected temperature sensors is shown on the
display.
Location

↑
↓ Menu
→
Mode
←
Configuration
Location

↑
↓ Menu
→
Mode
←
Configuration
Location

↑
↓ Menu
→
Mode
←
Language
Location

↑
↓ Menu
→
Mode
←
Scanning 00
Location

↑
↓ Menu
→
Mode
←
Scan sensors
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Mo 0:09 20