Specifications (cont.) – Veris Industries E50H5A Install User Manual
Page 2
ZL0117-0D
Page 2 of 28
©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Power Monitoring
E50H2A, E50H5A
TM
CONTROL POWER
AC 5 VA max.; 90V min.
UL Maximums: 600V
L-L
(347V
L-N
); CE Maximum: 300V
L-N
DC* 3 W max.; UL and CE: 125 to 300VDC
Ride Through Time 100 msec at 120VAC
INPUT
Pulse Solid-state or mechanical contacts (current less than 1 mA);
E50H2: 1 pulse input; E50H5: 2 pulse inputs)
Minimum Pulse Width 20 msec
OUTPUT
Alarm Contacts (E50H2 only) N.C., static output; (30VAC/DC, 100mA max.@25°C, derate 0.56mA
per °C above 25°C)
RS-485 Port 2-wire, 9600 to 115.2 kbaud, BACnet MS/TP
MECHANICAL CHARACTERISTICS
Weight 0.62 lb (0.28 kg)
IP Degree of Protection
(IEC 60529)
IP40 front display; IP20 Meter
Display Characteristics Back-lit blue LCD
Terminal Block Screw Torque 0.37 to 0.44 ft-lb (0.5 to 0.6 N·m)
Terminal Block Wire Size 26 to 14 AWG (0.13 to 2.08 mm
2
)
Rail T35 (35mm) DIN Rail per EN50022
OPERATING CONDITIONS
Operating Temperature Range -30° to 70°C (22° to 158°F)
Storage Temperature Range -40° to 85°C (-40° to 185°F)
Humidity Range <95% RH noncondensing
Altitude of Operation 3000 m
COMPLIANCE INFORMATION
US and Canada CAT III, Pollution degree 2;
for distribution systems up to 347V
L-N
/600VAC
L-L
CE CAT III, Pollution degree 2;
for distribution systems up to 300V
L-N
Dielectric Withstand Per UL 508, EN61010
Conducted and Radiated
Emissions
FCC part 15 Class B, EN55011/EN61000 Class B (residential and light
industrial)
Conducted and Radiated
Immunity
EN61000 Class A (heavy industrial)
US and Canada (cULus) UL508 (open type device)/CSA 22.2 No. 14-05
Europe (CE) EN61010-1
* External DC current limiting is required, see fuse recommendations.
Specifications
(cont.)