Veris Industries E50H5A Install - Manual (Page 20)

ZL0117-0D Page 20 of 28 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Power Monitoring
E50H2A, E50H5A
TM
BACnet
Programming
Information
(cont.) Legend
R/W R=read only; R/W=read or write
NV Value is stored in non-volatile memory. The value are still available if the meter experiences a power loss and reset.
Units Lists the physical units that a register holds.
Device Object
Property R/W NV Value Returned Additional information
Object_Identifier R/W NV Device<n> n is the 7 digit ID # set in the ID1 & ID2 setup screens on the meter. The BACnet Device
ID is a decimal number from 1 to 4,193,999 that can be entered or viewed on the user
screens or through this property. The default value set at the factory is a psuedo-
random number from 1,000,000 to 3,097,151 to reduce the likelihood of conflicts if
multiple units are installed using their default IDs.
Object_Type R NV Device (8)
Object_Name R NV Veris E50 Series Energy Meter - S/N: <serial
number>
Vendor_Name R NV Veris Industries, LLC
Vendor_Identifier R NV 133
Model_Name R NV E50HxA Energy Meter
Firmware_Revision R NV <Current Revision #> “xyyy”.
This is the BACnet processor firmware version in the format <xyyy>, with an implied
decimal point between the first two digits (x.yyy)
Application_Software_ Version R NV <Current version #> “RS= xyyy, OS=xyyy, BACnet Gateway=xyyy”
The format <xyyy> has an implied decimal point between the first two digits (x.yyy)
Location R/W NV <Location> Limted to 64 Characters - Default value is “Installed location not yet identified”
Description R NV Veris E50HxA DIN-Rail Energy Meter S/N:
<serial number>
Protocol_Version R NV 1 BACnet Protocol Version 1
Protocol_Revsion R NV 4 BACnet Protocol Revision 4
Local_Date R Date Set via BACnet Time Synchronization only - reverts to Jan 1, 2000 if control power drops
Local_Time R Time Set via BACnet Time Synchronization only - reverts to 12:00:00 AM if control power
drops
Segmentation_Supported R NV NO_SEGMENTATION (3) Segmentation is not supported
Max_Master R/W NV 1-127 (Factory Default is 127) Highest possible MAC Address for Master nodes on the local MS/TP network
Max_Info_Frames R NV 1 Maximum number of information frames allowed before passing the MS/TP token
Max_APDU_Length_Accepted R NV 480
APDU_Timeout R NV 60000
Number_of_APDU_Retries R NV 0
System_Status R NV Operational (0)
Protocol_Sevices_Supported R NV 0b0000000000001011010000000000000
011110000
Protocol_Object_Types_Supported R NV 0b1011000010000000000010000000000