V-Tech DMR18 Manual - Manual (Page 11)

Item Description
Factory
set
Add Card ... To add the user card
Delete By Card To delete card by user card
Delete By M.code To delete card by room code
Cards Information To show the informations about cards
Format To format informations about cards
Table 4(Card Memory):
4. Calling and Unlock Operation:
The DMR18 door station is a digital station with 320*240 pixels LCD screen, color CCD
camera, night view LED, and digital keypad.
Visitors can call the apartment by dialing the Flat Code (apartment number) on the keypad.
If they don’t know the Flat Code (apartment number), they can search the name list on the
screen. If the door station is in standby, visitors need to press '9#' to display the user name list.
Press"#" key to scroll next/last page. and use key 1 to 8 key on each page to call the desired
flat.
Residents can open the door by using their unique Unlock Code (four-digit PIN code). If the
door station is in standby mode, press '#' key, then input the four-digit unlock to open the door.
Please refer to part 5,section 7(How to use code unlock function) for more detail information.
5. About Default Set:
The Default Set is very important. When the door station miss up the settings in anyway,
the most quickly and easy way to solve the problem is to activate the default setting on door
station. The default settings already have all the right settings for one-building system, that
means the system will work normally without any additional settings. .
Note:
If the door station works as apartment system mode,input 01~32 to call the relevant
monitor.If the door station works as villa mode,input 01 to call the monitors which its code is
from 00~15. Input 02 to call the monitors which its code is from 16~31.please refer to table
2.1(working mode)
-10-