V-Tech DT-IP Technical Guide - Manual (Page 66)

Fulfill the call table, then press Write To Device to download the info to the corresponding
DT-IPC. You can call user or Guard Center by the corresponding button, for example, press
32nd button to call Default Guard Center, press 20th button to call the monitor whose user
code is 15 in D block.
8. Parameter Management for Blocks and Common Door Station
Because the item meanings of parameter management for blocks and common door
station are the same. So just take B Block of Benchmark Project as an Example
Click right mouse button on B Block, select Management, then select Parameter
Management in next page. Then it will pop up Parameter Management page
-64-
IP-2 wire system technical guide