VTech DS6641_-2 Manual - Manual (Page 36)

Telephone operation
32
Predial a cell call
To predial a cell call on a cordless handset:
Enter the telephone number.
Press DELETE or CANCEL to make corrections.
Press /CELL to dial.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
If you have two cell phones connected to the telephone base, the handset
displays Select a device. Press or to select a cell phone and then
press SELECT.
The handset displays Unable to call if your cell phone is in use.
To predial a cell call at the telephone base:
Enter the telephone number.
Press X/DELETE to make corrections.
Press /CELL to dial.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls.
If you have two cell phones connected to the telephone base, the telephone
base displays Select a device. Press or to select a cell phone and then
press SELECT.
The telephone base displays Unable to call if your cell phone is in use.
The screen displays the elapsed time as you talk (in hours, minutes and seconds).
While entering numbers, press and hold
PAUSE to insert a dialing pause
(a P appears).
Answer a cell call
To answer a cell call on a cordless handset:
Press /HOME, /CELL, or any dialing key (0-9, TONE or QUIET
#
).
To answer a cell call at the telephone base:
Lift the corded handset, or press /HOME, /CELL or any dialing key (0-9,
TONE or QUIET
#
).
You can also use your cell phone to answer the call. If you answer with your cell phone,
it will disconnect from the telephone base.
1.
•
2.
•
•
•
1.
•
2.
•
•
•
•
•
•
•