VTech DS6641_-2 Manual - Manual (Page 55)

51
Directory
Speed dial
You can copy up to nine directory entries into the speed dial locations ( 0 and 2-9) so
that you can dial these numbers via the home line more quickly.
The speed dial memory locations are stored at the telephone base and are shared
by all system devices. Changes made to the speed dial entries on one system device
apply to all.
Assign a speed dial number
1. Press MENU when the phone is not in use.
2. Press or to scroll to to scroll to Directory, then press SELECT.
3. Press or to scroll to to scroll to Speed dial, then press SELECT.
4. Press , or a dialing key ( 0 or 2-9) to choose the desired speed
dial location.
5. Press SELECT. The screen displays Copy from DIR... and then
the first entry in the directory.
6. Press or to scroll to desired entry.
7. Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
If the directory is empty when you press SELECT in Step 5, the
screen shows Directory empty.
Reassign a speed dial number
1. Press Press MENU when the phone is not in use.
2. Press or to scroll to Directory, then press SELECT SELECT.
3. Press or to scroll to Speed dial, then press SELECT.
4. Press , or a dialing key ( 0 or 2-9) to choose the speed dial
location you want to reassign.
5. Press SELECT twice. The screen displays Reassign SD.
6. Press SELECT. The screen briefly shows Copy from DIR... then
the first entry of the directory.
7. Press or to scroll to the desired entry.
8. Press
SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
Copy from DIR...
ECO
0:Mike Smith
ECO
Reassign SD
ECO
Copy from DIR...
ECO
Speed dial
ECO
0:<unassigned>
ECO