Wiha crimp tools, Crimp tools – Wiha Tools VDE tools brochure User Manual
Page 44
44
Z 62 0 000 06
Crimp tools for wire-end sleeves.
Head shape:
Square crimp, linear pressing.
Design:
Tool with only one crimp profile.
Automatic adjustment of cross-section area.
Lateral contact feed.
Low hand force required with optimal transmission.
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set.
Ergonomically formed soft handle with slip protection
for especially comfortable handling.
Material:
Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application:
For processing of wire-end sleeves with and without isolating collar
according to DIN 46228, EN 50027.
Especially suitable for processing twin sleeves.
Z 62 0 001 06
Crimp tools for wire-end sleeves.
Head shape:
Trapezoid crimp, radial travel.
Design:
Crimp profile:
Profile 1.
0.14 - 0.75 mm² / AWG 26 - 18
Profile 2.
1.0 - 1.5 mm²/ AWG 18 - 16
Profile 3.
2.5 mm² / AWG 14
Profile 4.
4.0 mm² / AWG 12
Profile 5.
6.0 mm²/ AWG 10
Profile 6.
10.0 mm² / AWG 8
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set. Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material:
Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application:
For processing of wire-end sleeves with and without isolating collar
according to DIN 46228, EN 50027.
Z 62 0 002 06
Crimping tools for isolated cable eyes and contacts.
Head shape:
Oval crimp, radial pressing.
Conducting and isolating crimp are carried out in one work step.
Design:
Crimp profile:
Red profile:
0.5 - 1.0 mm² / AWG 20 - 16
Blue profile:
1.5 - 2.5 mm²/ AWG 16 - 14
Yellow profile:
4.0 - 6.0 mm² / AWG 12 - 10
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set.Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material:
Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application:
For processing of red, blue and yellow isolated cable eyes,
pin-end cable connectors, contact pins, contact pin sleeves,
circular pins, circular pin sleeves, batch connectors
and parallel connectors according to DIN 46234.
For standardised, solderless electrical connections.
Z 62 0 004 06
Crimping tools for non-isolated cable eyes with closed sleeve.
Head shape:
W injection, radial pressing.
Design:
Crimp profile:
Profile 1.
0.1 - 0.5 mm² / AWG 26 - 20
Profile 2.
0.5 - 2.5 mm² / AWG 20 - 14
Profile 3.
4.0 - 6.0 mm² / AWG 12 - 10
Profile 4.
10.0 - 16.0 mm² / AWG 8 - 6
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set. Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material:
Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application:
For processing of non-isolated cable eyes, pin-end cable connectors,
batch connectors and mini cable eyes
according to DIN 46234/ DIN 46230/ DIN 46341.
For solderless electrical connections according to standards.
Crimp tools.
Order-No.
33845 196
0,08
–
10
28 – 8
300
1
136.00
Order-No.
33844 220
0,14
–
10
26 – 8
510
1
87.40
Crimp tools.
Order-No.
33841 220
0,5
–
6
20 – 10
510
1
82.50
Order-No.
33843 220
0,1
–
16
26 – 6
510
1
87.40
Wiha crimp tools.