Wiha info, Diagonal and cable cutters, Round nose pliers and diagonal cutters – Wiha Tools Pliers User Manual
Page 20
Z 14 0 06
Electrician's diagonal cutters Professional electric.
Individually tested protective insulation 1,000 V AC,
VDE and GS tested.
Standards:
DIN ISO 5749. Manufactured acc. to IEC 60900:2004.
Head shape:
Semi-circular, swedish style.
Design:
Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Lightweight action, clean cutting achieved by
specially milled precision cutting edges.
Durable cutting edges due to additional induction hardening to
approx. 62 HRC.
Rear cutting area near to plier joint also suitable for
medium-hard and hard wire.
Front cutting area for soft wire, with precision stripping stations
for 1.5 mm² and 2.5 mm² single-wire conductor.
Material:
Special tool-steel, hardened & tempered.
Application:
Special diagonal cutters with additional function for electrical installation.
For all work on or around electrical components up to 1000 V AC.
Z 50 1 06
Cable cutters Professional electric.
Individually tested protective insulation 1,000 V AC,
VDE and GS tested.
Standards:
Manufactured acc. to IEC 60900:2004.
Head shape:
Classic cutting form.
Design:
Light, energy-saving and clean cutting with
specially ground precision cutting edges.
Durable cutting edges due to additional induction hardening to
approx. 62 HRC. Safety stop prevents finger injuries after cutting.
Material:
Special tool-steel, hardened & tempered.
Application:
Cable cutter for cutting of copper and aluminium cables without crushing,
also suitable for stripping.
Not for steel cable, wires and copper conductors with hard coatings.
For all work on or around electrical components up to 1000 V AC.
249
www.wiha.com
Z 09 0 06
Long-round nose pliers Professional electric.
Individually tested protective insulation 1,000 V AC,
VDE and GS tested.
Standards:
DIN ISO 5745. Manufactured acc. to IEC 60900:2004.
Head shape:
Extra long head.
Design:
Ridged gripping surfaces.
Material:
High-quality tool steel, tempered.
Application:
Gripping and bending of wires and sheet metal parts.
For all work on or around electrical components up to 1000 V AC.
Z 12 0 06
Diagonal cutters Professional electric.
Individually tested protective insulation 1,000 V AC,
VDE and GS tested.
Standards:
DIN ISO 5749. Manufactured acc. to IEC 60900:2004.
Head shape:
Semi-circular, swedish style.
Design:
Low wear lap joint, riveted and able to withstand high loads.
Lightweight action, clean cutting achieved by specially milled precision
cutting edges. Durable cutting edges due to additional induction
hardening to approx. 62 HRC. The Wiha DynamicJoint ensures
optimal transmission of hand strength to the cutting edges.
Material:
High-quality tool steel, tempered.
Application:
Universal cutter for cutting soft and hard wires and cables,
also suitable for cutting and stripping cables.
For all work on or around electrical components up to 1000 V AC.
Z 16 0 06
Heavy duty diagonal cutters Professional electric.
Individually tested protective insulation 1,000 V AC,
VDE and GS tested.
Standards:
DIN ISO 5749. Manufactured acc. to IEC 60900:2004.
Head shape:
Semi-circular.
Design:
Low wear lap joint, riveted and able to withstand high levels of load.
Lightweight action, clean cutting achieved by specially milled precision
cutting edges. Long term cutting is achieved through additional inductive
hardening to approx. 64 HRC. The Wiha DynamicJoint ensures optimal
transmission of hand strength to the cutting edges.
Material:
High-quality tool steel, specially tempered.
Application:
Power-assisted all-round diagonal cutter for cutting
soft to extremely hard wires and cables.
For all work on or around electrical components up to 1000 V AC.
Diagonal and cable cutters.
Order-No.
26745 160
6
½
4.0
2.0
200
5
Order-No.
34743 160
6
½
16
50
190
5
34744
200
8
20
60
305
5
Round nose pliers and diagonal cutters.
Order-No.
26735 160
6
½
140
5
Order-No.
26737 140
5
½
4.0
2.5
1.8
160
5
26741
160
6 ½
4.0
2.8
2.0
200
5
26744 180
7
4.0
3.0
2.5
250
5
Order-No.
26748 160
6
½
3.5
2.5
2.0
190
5
26751
180
7
3.8
2.7
2.3
260
5
26754 200
8
4.2
3.0
2.5
315
5
Wiha
Info
Wiha DynamicJoint –
Top of their class
• Innovative: Unique joint construction
• Effective: Low loss of force means
less force needed for cutting – up to 40%
• Permanent: Optimal performance even after thousands of cuts
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:42 Seite 249