Wiha Tools Dead-blow hammer - Manual

212
Wiha dead-blow hammer.
A star in the world of recoilless tools.
Wiha has now put an end to the
familiar problems associated with
the stress on joints and muscles
when working with recoiling
hammers. The Wiha dead-blow
hammer has a special filling in the
hammer casing to prevent recoil.
Professionals who use these
hammers on a continuous basis, for
example, in tool and die shops or in
body maintenance and sheet-metal
work, appreciate the benefits of this
recoilless hammer from Wiha.
The face is made of medium-hard
polyurethane for full blows and protects
delicate surfaces and edges.
The special metal filling in the hammer
casing enables recoilless working.
Wiha dead-blow hammer.
• Recoilless working due to
special metal filling in the
hammer casing
• The hammer weight is
increased by about 25%
for additional power
• Easy on delicate surfaces and
edges as a result of its comfort
cushing surface
• Available with hickory wood
handle or steel tube shaft
• Faces and wooden handles
available as spare parts
Wear safety glasses and protective
gloves when working with soft head
hammers.
In addition, observe the national
standards and regulations.
Simple exchange of
worn hammer faces:
1. Grip the hammer in the vice,
lift to remove old hammer face.
2.Press the new hammer face
into the handle until it locks
into position.