Wiha Tools SoftFinish electric - Manual

slim
slim TECHNOLOGY
228
Wiha SoftFinish ® electric.
The safe and comfortable insulated VDE screwdriver.
Wiha SoftFinish ® electric.
• Safety when working with
live equipment up to 1000 V AC
and 1500 V DC
• Each screwdriver is individually
tested in a water bath at
10.000 Volts according to
IEC 60900:2004
• Awarded the GS symbol for
tested safety
• Multi-component SoftFinish ®
handle provides maximum
user comfort
Wiha SoftFinish ® electric
slimFix.
• Unlimited access
• Blades up to 33% narrower
due to integrated insulation
• Actuating tool for spring clips
(wedge-profiled output
geometry)
slim TECHNOLOGY :
Up to 33% reduction of the blade
diameter in the critical working area
allows effortless access to low-lying
fastening/ spring elements.
When working with VDE tools,
observe the national safety and
accident prevention regulations.
Applications on live equipment are
subject to very special requirements.
The focus is on absolute user safety
and Wiha demonstrates this with a
wealth of details.
The high quality blade insulation is
moulded directly onto the blade and
therefore guarantees safety when
working on live equipment up to
1500 V DC or 1000 V AC.
To maintain this safety, each screw-
driver of the SoftFinish
® electric
series is individually tested in a
water bath at 10000 Volts according
to IEC 60900:2004.
The roll-off protection and the special
handle geometry offer optimum
handling and electrical safety,
even in critical applications.
The right tool at a glance,
thanks to the printed screw symbol
on the handle end.