Wiha Tools L-Keys - Manual (Page 37)

146
Wiha Mini PocketStar.
The smallest blade at the push of a button.
The unique opening mechanism
facilitates an easy selection of
the desired key size.
Small but effective. The Mini PocketStar
from Wiha is the smart helper for service
engineers and for DIY use.
The 180° stop limit when working on
applications with higher safety require-
ments puts an end to trapped fingers.
Who hasn’t spent ages looking for
the small SW 0.9 hex key or for
other small keys?
Wiha has developed an extremely
smart solution to solve exactly
this problem: the Mini PocketStar,
a small practical helper that is
an absolute must in the toolbox of
every service and customer-service
engineer.
Regardless of whether replacing
a proximity switch or pnewmatic
control unit, or whether adjusting
the sensitivity of a light barrier.
With the Mini PocketStar, all keys
are within reach.
Wiha Mini PocketStar.
• All small keys are held together
in the Mini PocketStar.
Not a single blade is lost
• Each of the 8 blades can be
used as screwdriver when
set at 180° and as tool with
lever arm when set at 90°
• The glass-fibre-reinforced
polyamide holder ensures that
the Mini PocketStar withstands
every stress unscathed
• Of course, the smallest
PocketStar also has
the same special functions
as the "big" PocketStars
Mixed sets.
SB 351 PM8X Hex fold out holder Mini PocketStar.
With additional blades, 8 pcs.
Blister packed.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Handle: Ergonomic, reinforced fibreglass housing, 55 mm long.
Application: Practical fold out holder for mini keys so they no longer get lost.
Particularly suitable for use with the smallest screws, e.g. when tightening
screws or for the accurate setting of sensors.
Extra: Robust casing with eject button for simple and easy key selection.
Hanging loop with matching snap-hook.
Order-No.
27936 SB 351 PM8X 5
0.7 0.9 1.3 1.5 2.0
1.5 2.0
PH00
Mixed sets.
SB 363 PM8X TORX ® fold out holder Mini PocketStar.
With additional blades, 8 pcs.
Blister packed.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Handle: Ergonomic, reinforced fibreglass housing, 55 mm long.
Application: Practical fold out holder for mini keys so they no longer get lost.
Particularly suitable for use with the smallest screws, e.g. when tightening
screws or for the accurate setting of sensors.
Extra: Robust casing with eject button for simple and easy key selection.
Hanging loop with matching snap-hook.
Order-No.
27939 SB 363 PM8X 5
T4 T5 T6 T7
1.5 2.0
PH00
2.0
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 146