Yamaha PSR-530 - Manual (Page 87)

85
,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQ
■
Metronome
When turned “on” the PSR-530 metronome will sound during AUTO ACCOMPA-
NIMENT playback as well as SONG playback and recording.
■
Split Voice Split Point
See page 21.
■
Accompaniment Split Point
See page 29.
■
Fingering Mode
See page 30.
■
Voice Set
The VOICE SET feature brings out the best in each individual voice by automati-
cally setting a range of important voice-related parameters whenever an R1 panel
voice (voice numbers 1 … 200) is selected. The parameters that may be set by the
VOICE SET feature are listed below. This function lets you turn VOICE SET on or off,
as required.
on
Metronom
on
VoiceSet
● Voice Set parameter list
■
Song Transpose
This function allows you to transpose only the song to be played back. That means
you can play along with your desired song (Minus-one function) in the desired key
without affecting your performance.
• Since the Transpose
function (page 46)
sets the overall trans-
pose value, if it is
changed, the Song
Transpose value will
be changed by the
same amount at the
same time.
• The “normal” trans-
pose value (“00”) can
be recalled by simul-
taneously pressing
the [–] and [+] but-
tons.
• Minus values can be
entered by using the
number buttons while
holding the [–] button.
• The Song Transpose
value is automatically
set to “00” when the
record mode is en-
gaged.
02
SongTrns
• R1 Voice (Volume, Pan)
• R2 Voice (Voice number, volume, octave, pan, reverb
send level, chorus send level, DSP send level)
• DSP return level
• Harmony type, volume
• Pitch Bend Range
Overall Functions
The parameter below is set whether or not the voice set
function is on or off.
• R1 Voice (Octave, reverb send level, chorus send level,
DSP send level)
• Reverb ON/OFF
• Chorus ON/OFF
• DSP ON/OFF, variation ON/OFF
• DSP type
• The Voice Set func-
tion is on by default
when the power is ini-
tially turned on.