Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 148)

148
Chapter 3 PRINTER CONTROL
PRINTER CONTROL Submenus
SMT: Status
See “Software Migration Tools (SMT)” in the RFID Labeling Reference
Manual.
• Disable (factory default). The printer disables the use of the Software
Migration Tools functionality.
• Enable. The printer enables the use of the Software Migration Tools
functionality.
The factory default is Disable.
PAA: Select Tool
Refer to the PrintNet Enterprise Suite User’s Manual.
• Disable. The printer disables the use of PAA functionality.
• Enable. The printer enables the use of PAA functionality.
The factory default is Disable.
P-Series* P-Series XQ Serial Matrix Proprinter XL Epson FX
LP+
Emulation
(from page 146)
See page 183
Notes:
* = Factory Default
See page 185 See page 187 See page 189 See page 191