Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 260)

260
Chapter 3 ETHERNET PARAMS
Job Control
• Standard (factory default). The NIC waits for the entire job to be received
before it indicates the job is done.
• Enhanced. The NIC waits for the entire job to be printed before it
indicates the job is done.
• Off. There is no synchronization between the NIC and the printer.
NOTE: For detailed information about using the NIC, refer to the Network
Interface Card User’s Manual.
Offline Process
• Disable (the default). When set to disable, the printer does not process
parallel/network data while offline.
• Enable. When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.