Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 55)

Batch Rewind Mode
55
Installing The Media Guide
The media guide must be installed when using Batch Rewind mode.
To install the media guide:
1. Open the front door by pulling it upwards, then forward.
2. The bottom of the plastic media guide is shaped like a hook and the top
has a groove:
a. Hook the bottom of the media guide under the bottom edge of the
front door.
b. Snap the groove on the media guide to the top edge of the front door.
3. Close the front door.
Media
Guide
Groove
Hook
Front Door