Printronix SL5000r RFID Smart Label and Thermal Printers - Manual (Page 254)

254
Chapter 3 USB PORT
USB PORT
USB Port Submenu
Buffer Size in K
This option configures the amount of memory allocated for the serial port
buffer. The range is from 1 to 16 Kbytes, in 1-Kbyte increments.
The factory default is 16.
Timeout
This item allows you to set the time that the printer, when it has not received
data from its host, will begin to service all other host ports looking for data to
print.
The range is from 1 to 60 seconds, and the factory default is 10 seconds.
USB PORT
1
(from page 102)
Buffer Size
in K
16*
1-16
Timeout
10 sec.*
1-60 sec.
Notes:
* = Factory Default
1
This menu appears only if the USB option is installed.