Uncle Milton Earth In My Room - Manual

On/Off
switch
Battery
cover
6+
2160
Battery Installation
Tool required - Small Phillips head screwdriver
Requires 4 “AA” alkaline batteries (not included).
Wall Mount
1. Using a Phillips head screwdriver, remove the
battery cover as shown.
2. Insert 4 "AA" batteries as indicated in the battery
compartment and replace cover.
3. IMPORTANT! Switch Earth in My Room to the
ON position before handing on the wall.
PLEASE NOTE: The unit will not activate
without the remote control.
Remote Control
1. Using a Phillips head screwdriver, remove the battery
cover as shown.
2. Insert 2 "AAA" batteries as indicated in the battery
compartment and replace cover.
EARTH
IN MY ROOM
EARTH
IN MY ROOM
Light-up Earthscape
TM
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com