Uncle Milton Spider-Man Web Creator Lab - Manual

Parts included:
- 1 Web Creator Lab Base
- 4 Web Creator Plates
- Large Web Top Plate
- Large Web Bottom Plate
- Multi-Web Top Plate
- Multi-Web Bottom Plate
- 1 Beaker
- 1 Web Injector
- 1 Web Extractor
- 2 Packs of Red, Sticky Web Gel
- 2 Packs of Blue, Stretchy Web Gel
HOW TO CREATE SPIDER WEBS
Now you can create amazing webs just like Spider-Man using the Web Creator Lab. Make 4 different types of webs
including a large web, small action web, web ball, and web net. Each of these web types can be made as a sticky web,
using the red gel, or a stretchy web, using the blue gel. You can use the web gel over and over again by liquifying it and
using it to create fresh, new webs. To create your webs, follow these steps:
CAUTION: DO NOT EAT! Web Gel compound may cause allergic reaction in hypersensitive individuals.
KEEP AWAY FROM EYES. Adult Supervision Suggested.
STAIN ADVISORY: AVOID WEB GEL COMPOUND CONTACT WITH PAPER, LEATHER, WOOD, STONE, MASONRY,
CARPETING, FABRICS, AND TEXTURED SURFACES. COMPOUND MAY STICK TO AND PERMANANENTLY STAIN
THESE SURFACES. IF CONTACT OCCURS, PROMPTLY REMOVE COMPOUND FROM THESE SURFACES.
1. Select the matching Large Web Plates or Multi-Web
Plates. First, place the bottom web plate into the
Web Creator Lab base. Be sure to align the web
plate correctly using the Plate Key. Add the top
plate, aligning with the Plate Key, and close the
cover. Press on all three Frame Locks to secure the
assembled Web Plates.
Non-Sticky Web Gel
Stretchy Web Gel
Sticky Web Gel
Sticky Web Gel
Large Web Bottom Plate Multi-Web Bottom Plate
Multi-Web Top Plate Large Web Top Plate
Bottom Plate
Top Plate
Plate Key
Injection Port
Frame Lock
Frame Lock
Frame Lock
6+
18015
WARNING:
CHOKING HAZARD-Toy contains a small ball.
Not for children under 3 years.