Uncle Milton Lightshow DJ - Manual

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com
Base Lens
Storage
Fig. 1
Fig. 2
Fig. 3
Projection Unit
Light Effect
Lenses
6+
2168
Get ready to experience your favorite music in a whole new way. Now
you can create a dazzling light show right in your room! Lightshow DJ
syncs with your music, filling your ceiling and walls with multi-colored
lights that pulse and dance to the beat of your favorite tunes. Customize
the settings to reflect your own style and mood. Are you ready? Let the
music light show begin!
Parts included:
- 1 Projection Unit
- 1 Base
- 2 Light Effect Lenses
- 1 Decal Sheet
Battery Installation
Tool required - Small Phillips head screwdriver
1. Using a Phillips head screwdriver, remove the battery cover of the
Projection Unit as shown. (Fig. 1)
2. Insert 3 AA/LR6 batteries as indicated in the battery compartment
and replace cover.
SET UP
Audio Input
For best response to your music, position Lightshow DJ next to the
speaker of any audio source with the Lightshow DJ microphone
angled toward the speaker as shown. (Fig. 2)
Adjustable Projection Angle
Set Lightshow DJ in its base to project at one of four angles on your
walls or ceiling. Each angle will create a different light effect on your
wall. For best projection, position Lightshow DJ four to twelve inches
from a white wall. (Fig. 3)
Personalize your Lightshow DJ
You can personalize your Light Show DJ light pod base in many ways.
Peel and apply the stickers included in the package or customize with
your own stickers or other decorations.
INSTRUCTION
MANUAL
INSTRUCTION
MANUAL
OPERATION
On/Off
1. Press the MODE button once to turn on Lightshow DJ.
2. To turn off Lightshow DJ, press and hold the MODE button.
When you first turn on Lightshow DJ the settings are pre-selected as follows:
Music Program = Fast Beat
Color Selection = Random
Sensitivity = Level 3
Note: Internal memory will store your music and color mode settings after each use.
Music Program Selection Mode
1. Press the Mode button until all the LEDs flash GREEN. This indicates that the product is in Music Program Selection Mode.
2. Press up (to Fast Beat) or down (to Rolling Wave) on the Selection Bar to select one of the following Music Programs.
Each program will determine the speed and style of how Lightshow DJ responds to the beat of your music. Experiment
with all the different music programs to see which best fits your music and personal style.
Fast Beat – Creates quick flashes of light that rapidly pulse to the beat of your music. This program is best for dance music,
rock, pop, and other songs with fast beats.
Pulsing Vibe – Releases light that grows and pulses to the beat of your music. This program is great with hip hop,
alternative music, country and other songs with mid-tempos and pulsing beats.
Energy Flow – Slowly releases light that flows and surges to the beat of your music. This program works well with jazz,
blues, acoustic, R&B and slower tempo songs that still have distinctive beats.
Rolling Wave – Provides slow, gradual light changes. It’s great for chillin’ out to slow music of any style.
Color Selection Mode
1. Press the Mode button until all the LEDs flash RED. This indicates that the product is in Color Selection mode.
2. Press up or down on the Selection Bar to select your desired color mode.
There are six different color modes to choose from that provide a variety of vibrant colors in different combinations. The
default color mode is set at Random. This mode will randomly project different color combinations with your music.
Sensitivity Adjustment Mode
1. Press the Mode button until all the LEDs flash BLUE. This indicates that the product is in Sensitivity Adjustment mode. This
mode allows you to adjust how sensitive Lightshow DJ is in the Fast Beat Program. The more sensitive the setting, the
more it will react to your music, both high and low volumes.
2. Manually adjust the audio sensitivity up or down by pressing the Selection Bar. There are five audio sensitivity settings. The
default sensitivity setting is at level three.
Note: If Lightshow DJ is not responding to the music and the lights are not changing with the music, the audio sensitivity may
need to be adjusted up or down based on speaker volume or the distance of Lightshow DJ to your speaker.
Microphone
Batteries not included
Requires 3 x 1.5V AA/LR6 batteries
AA/LR6
x3