Velleman DVM4200 - Manual (Page 13)

22.04.2011
7.7 Tem
Do
• Set the ro
is connect
• Place the a
with “VΩ
• Plug the th
• Hold the t
• Read the t
7.8 Curr
Do
Cur
For
Alw
Kee
me
• For meas
and the bl
• For meas
the black l
• Set the ro
test probe
• Set the ro
test probe
• Set the ro
probe is co
• Press the
• Connect th
• Read the m
Notes:
o for DC-c
test lead
o
The µAm
the 10A
8. Main
Do
by
test
a. Genera
Wipe the dev
solvents.
b. Fuse Re
Swi
and
bat
Refer to the
• Remove th
open the m
mperature meas
not touch any liv
tary switch to the
ed, the current env
adaptor socket betw
”).
hermocouple (type
ip of the temperatu
temperature on the
rent Measurem
not measure curr
rrent measuring jac
currents up to 10A
ways be careful whe
ep your fingers beh
asurement.
surements up to 6
ack lead to the "CO
surements up to 1
lead to the "COM" j
tary switch to the µ
e is connected to the
tary switch to the m
e is connected to the
tary switch to the A
onnected to the 10A
SELECT button to s
he test probes in se
measured value fro
current measureme
d, the indicated val
mA-range is protect
A-range is protected
ntenance
not replace interna
identical ones with
t probes at your de
al maintenance
vice regularly with a
eplacement
itch off the multi-m
d remove the test le
teries or fuses.
illustration on page
he 4 screws at the
meter.
DVM4200
13
surements
ve parts with the t
°F°C range. When
vironmental temper
ween the “VΩ ”
K) into the adaptor
ure probe against th
e LCD.
ents
rent in circuits wi
ck µA/mA max. 600
A use the 10A jack.
en working with volt
ind the probe barrie
600mA: connect th
OM" jack.
10A: connect the re
jack.
µA range for measu
e µAmA jack).
mA range for meas
e µAmA jack).
A range for measur
A jack).
select DC current (D
eries with the circuit
m the display.
ents, when a negati
ue is preceded by a
ted against over cu
d against over curre
al parts yourself. Re
the same specificat
aler.
a moist, lint-free clo
meter, disconnect th
eads from the meas
es 3 of this manual
back (indicated wit
temperature mea
n no temperature m
rature is displayed.
and the “COM” jac
r socket (align “+” w
he object under test
ith voltages > 100
0mA.
tages above 60Vdc
ers at all times duri
e red test lead to th
ed test lead to the "
urements up to 600
urements up to 600
ements up to 10A (
DCA) or AC current
t.
ve polarity is prese
a “-” sign.
rrent with a F630m
ent with a F10A 100
eplace damaged or
tions. Order spare a
oth. Do not use alc
e test leads from th
suring jacks before
.
h in the illustra
©Velleman nv
suring probe.
measuring probe
k (align “+”
with “+”).
t.
00V
or 30Vac rms.
ing
he "µAmA" jack
"10A" jack and
0µA (only when
0mA (only when
(only when test
(ACA) mode.
ent at the red
mA 1000V fuse,
00V fuse.
lost accessories
accessories e.g.
ohol or
he test points
replacing the
ation) and gently