Velleman DVM1500 - Manual (Page 4)

DVM1500
V. 03 – 04/11/2013 4 ©Velleman nv
Earth
Fuse
Capacitor
Diode
Continuity
Backlight
3. Safety Instructions
Follow the instructions below to guarantee a safe use of the meter
and all its functions.
During use of the meter, respect all directives concerning protection
against electroshocks and misuse. Never exceed the indicated limits.
WARNING
For safety reasons, please read the manual.
Remark: this warning is also found on the back of the meter (top
part).
WARNING: To avoid electrical shock always disconnect the test
leads prior to opening the housing. To prevent damage or injury,
only use batteries and fuses of the same type and ratings as
specified in this manual.
Remark: Refer to the warning on the back of the meter.
Avoid cold, heat and large temperature fluctuations. When the unit
is moved from a cold to a warm location, leave it switched off until it
has reached room temperature. This to avoid condensation and
measuring errors.
Protect this device from shocks and abuse. Avoid brute force
when operating.
Pollution degree 2 device. For indoor use only. Keep this device
away from rain, moisture, splashing and dripping liquids. Not for
industrial use. Refer to §5 Pollution degree.
Keep the device away from children and unauthorised users.
Risk of electric shock during operation. Be very careful when
measuring live circuits. Use extreme caution when measuring
voltages higher than 60 Vdc or 30 Vac rms.
Do not replace internal parts yourself. Replace damaged or lost
accessories by identical ones with the same specifications. Order
spare accessories, e.g. test leads, from your dealer.
This is an installation category CAT III 600V / CAT II 1000V
measuring instrument. Never use this equipment in a higher
category than indicated. Refer to §4 Overvoltage/installation