Rough Country 352 - Manual (Page 10)

1. Using a screwdriver remove license plate.
2. Find the spare tire tools under passenger side seat and remove spare tire from truck. See Photo 1.
3. Unplug trailer and lighting harness from bumper. See Photo 2 & 3.
4. Using 13mm and 15mm wrench remove bolts from bumper on both sides. See Photo 4. Retain stock hardware.
5. Remove the center bolts from bumper using 15mm socket and remove. See Photo 5. Retain stock hardware.
6. Remove
the 6 bolts from truck bed using 18mm socket. See Photo 6, 7 & 8.
BED INSTALLATION INSTRUCTIONS
PHOTO 1 PHOTO 2
PHOTO 4
PHOTO 5 PHOTO 6
PHOTO 7 PHOTO 8
PHOTO 3
LOWER SPARE TIRE FROM MOUNT UNPLUG TOWING CONNECTOR
REMOVE PLATE ILLUMINATION HARNESS REMOVE BUMPER BOLTS
REMOVE CENTER BUMPER BOLTS REMOVE REAR BED BOLTS
REMOVE CENTER BED BOLTS REMOVE FRONT BED BOLTS