Rough Country 352 - Manual (Page 8)

10. Undo the clips on lower fan shroud pull down and remove. See Photo 13 & 14.
11. Using a 10mm remove ground wire from frame on driver side. See Photo 15.
12. Loosen all cab body mounts. On one side of the cab only, remove the bolts using a 18mm socket. See Photo 16.
Retain the factory hardware.
13. Using a 16mm remove nuts from body mounts. See Photo 17.
14. Using jack stand lift body slowly from the frame. See Photo 18.
PHOTO 13 PHOTO 14
PHOTO 15 PHOTO 16
PHOTO 17 PHOTO 18
UNCLIP FAN SHROUD REMOVE THE LOWER FAN SHROUD
REMOVE THE GROUND WIRE REMOVE CAB BOLTS (ONE SIDE ONLY)
REMOVE NUTS FROM CAB BODY MOUNTS SLOWLY LIFT BODY