Banks Power Chevy_GMC Trucks: Duramax LB7 (Diesel ’01 - 04 6.6L) Tuner- Six-Gun Diesel Tuner with optional Speed-Loader Module '01-04 For use with Six-Gun Switch User Manual
Page 17
Advertising
96446 v.4.0
17
28.
Attach the thermocouple to the
supplied thermocouple leadwire
extension with supplied nuts and bolts.
Cover this joint with the supplied heat
shrink tubing and heat until the tubing
conforms to the joint. Make sure the
entire joint is insulated.
29.
Route the thermocouple leadwire
along the factory harness to the
driver’s side and through the rubber
grommet in the firewall. From inside
the cab, route the leadwire on the left
side of the support bracket to the Six-
Gun Diesel Tuner. Connect the 2-pin
thermocouple connector to the front
of the Six-Gun Diesel Tuner into
corresponding 2-pin connection.
30.
Reconnect the ground cables to
the vehicles batteries.
-END, SECTION 4-
Advertising