Banks Power Cummins Motorhomes: (Diesel ’03 - 07 ISB-CR 5.9L) Tuner- EconoMind Diesel Tuner, Class-A w_Allison 3000MH '03-07 Compatible with Optional PowerPDA & Dynafact Gauges - Manual (Page 24)

24
96420 v.5.0
If installing gauges, skip to Section 7.
If installing PDA, skip to Section 8.
DynaFact gauges are a useful tool to
monitor vehicle performance. There
is a turbo boost gauge and an EGT
gauge that will measure exhaust
temperatures.
1.
Run the Diagnostic Port Harness
to the Tuner Harness. Use the
Jumper Harness to connect the
EconoMind and the Diagnostic Port
Harnesses together. You should feel
the connectors lock together. Secure
the Harnesses away from hot and/or
moving engine components with cable
ties.
2.
Reconnect the battery ground
cable(s).
3.
Double check everything to make
sure it is securely fastened and it
is not near any hot or moving parts
before starting engine.
4.
Go to Section 10 for transmission
learning procedures.
-END SEcTION 6-
Section 6
Installation of EconoMind Tuner without PowerPDA or DynaFact
Gauges