Banks Power Cummins Motorhomes: (Diesel ’03 - 07 ISB-CR 5.9L) Tuner- EconoMind Diesel Tuner, Class-A w_Allison 3000MH '03-07 Compatible with Optional PowerPDA & Dynafact Gauges - Manual (Page 26)

26
96420 v.5.0
to the RED wire and connect to
the fuse as shown in Figure 10.
Alternatively, locate power wire to
dimmer switch and install T-tap.
cut the RED wire as required and
strip the end. crimp the push on
T-tap connector to the RED wire
and connect to T-tap on dimmer
power wire.
e. Locate a metal surface that will
serve as an acceptable chassis
ground. cut the BLAcK wire to a
sufficient length that will allow it to
reach the chassis ground and strip
the end. crimp the ring terminal to
the BLAcK wire as shown in Figure
10.
f. Drill a 1⁄8” hole, if required, to
attach the ring terminal to the
chassis ground. caution: If drilling,
check the backside to make sure
there are no components that may
be damaged by drilling.
g. Use the supplied self-tapping screw
to secure the ring terminal to the
chassis ground
Figure 19