Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) - Manual (Page 19)

96834 v.1.0
19
the acceleration pedal and vehicle
speed is above 15 mph, regardless of
whether or not the foot brake is used.
If the Foot Brake Activation is enabled
the SpeedBrake will only activate when
the foot brake is applied.
To Enable or Disable Foot Brake
Activation press on the ‘Foot Brake
Activation’ Icon on the top of the
screen. See Figure 14. The Foot Brake
Activation is enabled when the icon is
highlighted and disabled when crossed
out.
aUTO Mode
While in the AUTO mode, press the Up
arrow to increase the target speed or
press the Down arrow to decrease the
target speed in increments of 1 MPH
or 5 MPH.
Press on the ‘Target Speed Increment
Switch’ button to select the increment
value (1 MPH or 5 MPH). See Figure 15.
AUTO mode uses various functions of
Banks SpeedBrake to keep the vehicle
at the driver’s pre-set target speed.
When AUTO mode is active and the
vehicle is above the targeted speed,
Banks SpeedBrake will cause braking
activity to take place and slow the
vehicle to the targeted speed and then
adjust to maintain it. Banks SpeedBrake
activity will include varying the position
of the turbocharger vanes, selecting
the appropriate transmission gear and
selectively locking the torque converter
clutch. Banks SpeedBrake will become
inactive as soon as the vehicle drops
below the targeted speed.
NOTE: If the target speed cannot be
met after Banks SpeedBrake has taken
all possible actions to do so, a yellow
‘Foot Brake’ icon to the driver will
display on the Status Indicator in the
upper right-hand corner of the screen
to warn the driver that he/she should
use the foot brake to slow the vehicle.
This feature may be disabled by going
to the ‘On Screen Alerts’ screen in the
‘Adjustments’ menu.
Figure 14
Foot Brake
Activation Icon
Figure 15 AUTO Mode
Target
Speed