Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks iQ 2.0 Ford(03-10), Chevy(01-10), Dodge(03-07) - Manual (Page 46)

46
96834 v.1.0
alert indicator Description
SEARcHING- A searching icon will
indicate a communication error between
the Banks iQ, Bridge, Tuner, Brake, and/
or the vehicle. Go over all wiring and
make sure they are proper connected.
VEHIcLE SPEED- The vehicle speed icon
will indicate the vehicle speed is above
the user alert set point. Lower your
speed below the set speed to clear the
alert.
TUNER FAULT- A error with the tuner
will set off an alert. Follow the trouble
shooting in Section 27 to correct the
problem.
TRANS TEMP- The transmission
temperature is over the user alert set
point. Safely stop the vehicle and check
the transmission.
OIL TEMP- The vehicle engine oil
temperature is over the user set alert
point. Safely stop the vehicle and check
the engine oil.
RPM- The vehicle RPM is over the user
set alert point. Reduce speed to lower
RPM. If alert continues, safely stop the
vehicle and check your engine.
BOOST- The vehicle boost is over the
user set alert point. Safely stop the
vehicle and check the turbo connections.
ENG TEMP- The Enigne temperature is
over the user set alert point. Safely stop
the vehicle and check the engine.
EGT- The Exhaust Gas Temperature is
over the user alert set point. Reduce
speed to reduce the EGT’s.
Go to the begin of this section to adjust
the user alert set point for any alert.
-END, SEcTION 24-
Figure 47 Alert indicator icons