Banks Power Chevy_GMC Trucks: Duramax LMM (Diesel ’07 - 10 6.6L) Tuner- Six-Gun Diesel Tuner '07-09 (PDA) Compatible w_ Optional PowerPDA User Manual

Page 7

Advertising
background image

96508 v.7.0

7

1.

Disconnect the battery ground

cables from each of the batteries.

Secure the cables so that they do not

come in contact with the battery posts

during the installation.

2.

Place the Banks Six-Gun Tuner on

top of the fuse box cover. Direct the

wire harness towards the rear of the

vehicle as shown in Figure 2.

Note: Do not attach the tuner at this

time.

3.

Locate the black and gray wire

harness locking connectors between

the brake fluid reservoir and the air

conditioning compressor. Slide the

green locking tabs back and lift the

blue connector locks to disconnect the

connector pairs. See Figure 3.

Section 1

INSTALLATION OF WIRING HARNESS, CONNECTIONS AND SIx-GUN

DIESEL TUNER

Figure 1 Six-Gun Tuner and supplied wiring harness

Advertising