Banks Power Dodge Trucks: (Diesel ’98 - 02 5.9L Cummins ISB) Exhaust- Monster Exhaust '98-02 - Manual (Page 3)

9 6 4 2 1 v . 2 . 0
|
3 3 |
9 6 4 2 1 v . 2 . 0
General Installation Practices
1.
For ease of installation of
your banks Monster exhaust
system, please read this
8 page owner’s Manual
before starting any work.
become thoroughly familiar
with all components and
phases of the installation
before beginning any work.
See Figure
1 for a complete
component listing.
2.
Inspect all components
supplied for any foreign
material that may have
entered during shipping and
handling.
3.
the installation should
be performed at a time
when the vehicle has been
allowed to completely cool.
this installation requires the
installer to work near surfaces
that may remain hot after the
vehicle has been run. Failure
to allow the vehicle to cool
may result in personal injury.
4.
pay particular attention
to the routing of wires.
Keep them away from
exhaust heat, moving parts
and sharp edges that may
cause damage. route or
tie away from critical areas
as required. Keep all wires
a minimum of 6” from hot
exhaust parts, 8” or more
is recommended whenever
possible.
warning! never work under
any vehicle supported only
by a jack of any kind. Do
noT uSE concrete blocks or
other masonry items that
may collapse under the
vehicle weight.
Dear Customer,
If you have any
questions concerning
the installation of
your Banks Monster
Exhaust System,
please call our
Technical Service
Hotline at (888) 839-
2700 between 7:00
am and 5:00 pm
(PT). If you have any
questions relating to
shipping or billing,
please contact our
Customer Service
Department at
(888) 839-5600.
Thank you.