Grain Systems PNEG-546 User Manual
Page 13
2. Align the holes in the leg stand (G) with the holes in the dryer frame, and fasten in place using the
bolts and nuts that were previously removed (A and B).
3. Align the top hole in the leg stand (G) with the hole in the basket leg (F).
4. Fasten the legs together using a bolt (E), shim (C), and nut (D).
5. For a secure fit, use the shim plates (H) to make any minor adjustments to the leg height.
Figure 2-6 Installing leg stands along dryer frame
Callout
Part number
Description
A
S-3883
Original bolts installed on dryer (0.50 in. - 13 X 1.75 in. zinc
grade 8 HHCS bolt)
B
S-6493
Original nuts installed on dryer (0.50 in. - 13 zinc grade 2
deformed lock nut)
C
D01–1221
Shim dryer stand to dryer
NS
S-2121
0.50 in.x 1.375 in. flat washer
D
S-8506
0.50 in. -13 zinc flange nut
E
S-8856
0.50 in. - 13 X 1.75 in.zinc grade 5 flange bolt
F
D01–0007
Basket corner leg
G
D01–xxxx
For leg stand, refer to
Guidelines for Supporting the Dryer with
H
FC-42077
Shim plate