Grain Systems PNEG-546 - Manual (Page 9)

2
Dryer Supports
Topics Covered in this Chapter
▪ Guidelines for Supporting the Dryer with Leg Stands
▪ Leg Stand Spacing
▪ Installing Front and Rear Anchor Plates
▪ Installing a Leg Stand to the Dryer Basket Corner
▪ Installing a Leg Stand Along the Dryer’s Frame
▪ Installing the Leg Stands Behind the Hitch Frame
Guidelines for Supporting the Dryer with Leg Stands
Before filling the dryer with grain, the dryer frame must be supported with either concrete blocks or leg
stands. Leg stands are optional and available in seven different sizes to accomodate various dryer
heights.
Leg Stand Height Options
Leg stands are optional and must be ordered separately from your dryer. If you do not have leg stands,
you must support the dryer with concrete blocks.
Figure 2-1 Leg stand heights
Part number Leg stand height
D01–0408 16 in. (406.4 mm)
D01–1046 18 in. (457.2 mm)
D01–0398 24 in. (609.6 mm)
D01–0399 30 in. (762 mm)
D01–1047 36 in. (914.4 mm)
D01–0582 42 in. (1066.8 mm)
D01–0761 48 in. (1219.2 mm)